BJKQG - E-943 PART A

  • MSDS: BJKQG
  • Manufacturer: FLAMEMASTER CORP
  • Product Name: E-943 PART A
  • National Stock Number: 8030-01-032-1749
Product Identification

Product ID:E-943 PART A
MSDS Date:06/21/1990
FSC:8030
NIIN:01-032-1749
Kit Part:Y
MSDS Number: BJKQG

Responsible Party
FLAMEMASTER CORP
11120 SHERMAN WAY
SUN VALLEY, CA 91352-4949
US

Emergency Phone: 800-424-9300

Info Phone: 818-982-1650

Preparer: HERBERT H. MOORE

Cage: 14439

Contractor
FLAMEMASTER CORP THE CHEM SEAL DIV
SUN VALLEY, CA 91352-4949 US

Telephone: 818-982-1650

Cage: 14439

Ingredients

BISPHENOL A DIGLCIDYL ETHER RESIN

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 17%


N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 2%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FOR SENSITIVE INDIVIDUALS, REDNESS AND
ITCHING OF SKIN MAY OCCUR ON REPEATED EXPOSURE. DERMATITIS MAY
RESULT FROM PROLONGED OR FREQUENT CONTACT.
Effects of Overexposure:EYE IRRITATION WITH TEARING AND REDNESS.
ITCHING AND REDNESS OF SKIN.
Medical Cond Aggravated by Exposure:ECZEMA OR PREVIOUS SKIN IRRITATION
OR ALLERGY.

First Aid

First Aid:EYES: FLUSH WITH FLOWING WATER FOR AT LEAST 15 MINUTES.
OBTAIN MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:> 200F/> 93C
Extinguishing Media:FOAM, DRY CHEMICAL, WATER SPRAY, CO2.
Fire Fighting Procedures:IN CONFINED AREAS WEAR SELF-CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SCOOP UP AND RETURN TO CONTAINER. REMOVE
RESIDUE WITH SOAP AND WATER OR 1,1,1 TRICHLOROETHANE.

Handling

Handling and Storage Precautions:STORE IN COOL DRY AREAS AWAY FROM
DIRECT SUNLIGHT. KEEP IN CLOSED CONTAINERS.
Other Precautions:AVOID CONTACT WITH SKIN, EYES AND CLOTHING. WASH
CONTAMINATED CLOTHING BEFORE REUSE.

Exposure Controls

Respiratory Protection:MSHA/NIOSH APPROVED ORGANIC VAPOR RESPIRATORS
FOR HOT MATERIAL.
Ventilation:LOCAL EXHAUST HOOD/MECHANICAL FAN PREFERRED.
Protective Gloves:NITRILE OR NEOPRENE
Eye Protection:SAFETY GLASSES WITH SPLASH GUARD
Other Protective Equipment:APRON, SAFETY SHOES
Work Hygienic Practices:USE EYEWASH STATION. DO NOT SMOKE, DRINK OR EAT
IN WORK AREAS.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>400F,>204C
Melt/Freeze Pt:M.P/F.P Text:ROOM TEMP
Decomp Temp:Decomp Text:ABOVE BOIL
Vapor Pres:< 1
Vapor Density:> 1
Spec Gravity:1.48
pH:6.5
Evaporation Rate & Reference:BUTYL ACETATE = 1
Solubility in Water:SLIGHT
Appearance and Odor:DESERT SAND, GREEN, NAVY GRAY, OLIVE DRAB, ESTER
ODOR
Percent Volatiles by Volume:0.90

Stability

Stability Indicator/Materials to Avoid:YES
BASE COMPOUNDS, AMINES
Stability Condition to Avoid:HIGH HEAT
Hazardous Decomposition Products:ALDEHYDES, CARBON MONOXIDE, CARBON
DIOXIDE, PHENOLICS, SOOT
Conditions to Avoid Polymerization:STRONG BASES

Disposal

Waste Disposal Methods:REACT WITH CURING AGENT AND DISPOSE AS
NON-HAZARDOUS SOLID, ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.